100% Energy Feedback AC Load with >0.99 Power Factor

Product Description

Product Description

Product Introduction

The ACL-R-P series single/three-phase programmable AC load incorporates new alloy resistive wire material and operates 
via energy dissipation. It employs forced air cooling with compact axial fans, delivering high airflow, excellent heat dissipation, 
and low noise. Capable of simulating various power loads, it is suitable for routine maintenance testing, factory acceptance 
testing, and product aging of switch-mode power supplies, generator sets, inverters, and similar equipment.

The ACL-R-P series is a single-/three-phase programmable AC load built with advanced alloy resistive wire and forced-air cooling via compact axial fans, ensuring high airflow, excellent heat dissipation, and low noise. It can simulate various power loads and is ideal for routine maintenance, factory acceptance, and aging tests for switch-mode power supplies, generator sets, inverters, UPS, and aviation (400 Hz) equipment.

Key features include a 7-inch LCD touchscreen and PLC interface, supporting local and PC control with dedicated host software. The programmable sequencer allows 0-20 power/current steps, configurable with 1 ms resolution and up to 999,999 cycles. Real-time measurement data can be uploaded and logged for full traceability. Stainless-steel alloy resistors eliminate thermal-drift impedance errors. Users can set discharge power, duration, and automatic shutdown. The load evaluates efficiency, full-load output, and dynamic response, simulating surges and sags. Safety includes emergency stop, overload/short-circuit/over-temperature protection (0–100°C adjustable with real-time monitoring). An integrated power-factor navigator automatically calculates discharge values from power, current, or PF settings.

Extended applications cover switch-mode power supply testing, generator/energy (PV inverters, PCS), inverter and drive testing, aerospace power, EV chargers, and research labs. The load's flexible programming and wide power range make it equally effective for DC-derived systems via rectification or inversion, positioning it as a versatile ac dc load solution for both AC and DC power stages. It offers precise efficiency measurement, dynamic transient evaluation, and robust protection verification within one intelligent platform.

Product picture

Specification

ACL-R-P Series Single-Phase Programmable AC Load
Model	ACL-R06S-P	ACL-R10S-P	ACL-R30S-P	ACL-R50S-P	ACL-R100S-P	ACL-R300S-P	ACL-R500S-P
Discharge Power	6KW	10KW	30KW	50KW	100KW	300KW	500KW
Test Voltage	0-300VAC single-phase two-wire system (customer-selectable, custom voltages available, e.g., 400VAC, 690VAC)
Frequency	50Hz/60Hz, 400Hz (custom frequencies available)
Power Factor	PF=1, special customization available.
Min. Step	0.1KW	0.1KW	1KW	1KW	1KW	2KW	10KW
Display	Vrms,Arms,Wattage,Fre,PF,Temp
Voltage Accuracy	0.5%
Current Accuracy	0.5%
Load Regulation	3%
Control Mode	Touch screen+PC
Programmable Groups	30 Groups
Supply Voltage	Single-phase 220VAC,50Hz
Operating Mode	Continuous operation
Protection	Overtemperature protection (OTP), overtemperature alarm, overcurrent protection (OCP), short-circuit protection (SCP).
Communication Interface	RS232/RS485
Insulation Class	Class F
Ingress Protection (IP) Rating	IP30 (indoor)
Cooling	Forced air cooling
Noise	Less than 75dB at 1 meter distance
Operating Environment	-10~45℃ (customization required for outdoor-20℃ to-50℃) 10~90%RH
Weight(Kg)	100	150	250	200	600	900	1200
DimensionsW X H X D (mm)	480X800X750	480X800X750	700X1000X900	700X1200X900	950X1500X900	1200X1800X900	1200X1800X900
Note	Power factor 0.3–1, customizable

Product Feature

Product Feature

Control via touchscreen + PLC interface, supporting both local control and PC control modes. Provides corresponding host computer operation software control methods.

Programmable interface allows 0-20 groups of power/current settings with arbitrary configuration. Minimum execution time of 1ms, capable of 999,999 cycles.

Uploads measurement data to computers and records/stores process data throughout testing.

Constructed with stainless steel alloy resistors, preventing thermal drift in impedance values caused by heating of resistive load components during testing.

Users can configure discharge power, discharge duration, and automatic load shutdown upon timer expiration based on performance parameters and testing requirements.

Evaluates operational efficiency, maximum full-load output power, and load-bearing capacity of various power generation and discharge equipment.

Simulates complex operational environments, including sudden power surges and drops, to evaluate discharge equipment's actual load capacity and efficiency.

Features emergency stop and thermal protection; automatically disconnects during overload, short circuit, or overheating.

Includes over-temperature protection with adjustable temperature setting (0-100°C) and real-time monitoring.

Integrated power factor navigator: Users only need to set power, current, or power factor values; the system automatically calculates the discharge value. Users may modify this value or initiate operation directly

Features 7-inch LCD touchscreen control with LCD meter display

Packing & Delivery

Packaging Method

Packaging: Standard export carton or solid wooden case. All wooden cases are strictly fumigated and stamped with IPPC marks in accordance with ISPM-15 export standards.
Shipping: By sea freight or air freight as per your requirement.
Delivery Lead Time: 25–30 working days after order confirmation.

Certifications

After Sales Service

Warranty: 12 months (or as per your requirement) against manufacturing defects. During the warranty period, we will provide free repair or replacement parts for any quality-related issues.

Company Profile

Jethley Electronics (Suzhou) Co., Ltd. is a national high-tech enterprise specializing in the independent R&D and production of AC/DC power supplies, AC/DC loads, and system integration services, possessing independent intellectual property rights.
The company holds over 70 R&D patents and more than 30 individual patents, having successively obtained qualifications including National High-Tech Enterprise, Dual-Software Enterprise, Specialized, Refined, Unique, and New Enterprise, and Engineering Technology Research Center for New Energy Product Testing Equipment. Its products have received calibration certificates from national authoritative bodies, CE certification, Quality Management System certification, Environmental Management System certification, and Occupational Health and Safety Management System certification.
With sales offices and after-sales service centers in Shenzhen, Hangzhou, Xi'an, and Beijing,
The company leverages its core products—test power supplies and test loads—alongside years of industry testing expertise. It specializes as a renowned comprehensive test solution system integrator, integrating R&D, production, sales, and service across power supply testing solutions, new energy testing solutions, electronic component testing solutions, industrial automation solutions, and product aging testing solutions.